Other Operations, Dialing from talk mode

Other Operations

To	Do this
To adjust the earpiece volume	Press	or	during a call.
To temporarily switch to tone dial	Press		. The following numbers

(when the base is set to pulse mode)	will be sent as tone dialing.
To enter a pause within the	Press		. “P“ appears in the display
dialing sequence	which represents a pause.
To improve the reception	Press		during a call.
	“ Scanning“ appears on the display.
	If the operation fails, the error tone sounds.

1 Press	.
“ Talk“	flashes on the display.

Then the volume setting is displayed.

Example: Volume level Volume Medium.

If you set the ringer to off,

“ <Ringer Off>“ appears on the display.

Af ter about 5 seconds, the call-time display appears.

2 Enter the phone number. Example: Enter 8002971023

The number is dialed.

3 To hang up, press or place the handset on the base. The call-time will be displayed for about 5 seconds.

B A S I C S [ 13 ]

BASICS