If the handset battery pack is completely discharged or the battery pack is removed, the digital security code will be lost. If this happens, a new security code is set automatically next time the battery pack
is charged.
Changing the Digital Security Code
The digital security code is an identif ication code used to connect the handset and the base unit. Normally, setting the code is not necessary.
The f irst time you charge your handset, the security code is automatically set. (See page 4.)
In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code.
1Remove the handset from the
base unit. Press and hold 
.
2 While the handset is emitting the paging sound, replace the handset on the base unit. The paging tone stops.
Leave the handset on the base for more than 3 seconds. A random, new security code is set.
[ 38 ] A D D I T I O N A L I N F O R M AT I O N
