note 
You must subscribe to voice mail service from your telephone company in order to use this feature. The voice mail service company will provide you with the access number.
Using One Touch Voice Mail Access
If you subscribe to voice mail service, you can use your phone to access your voice mailbox. The New Message LED flashes whenever you have messages waiting in your voice mailbox.
Just program the handset with your access number, and you can get your messages at the touch of a button. (The voice mail service provider will supply you with the access number. This number may be simply a phone number. Refer to the provider's literature.)
To program or delete your Voice Mail Access Number, See page 20.
When you have messages, simply press the 
soft key on the base or 
on the handset. If you have not entered the access number or it has been deleted, when you press the 
soft key on the base
or 
on the handset, No Number Stored Store number in Menu Setup
appears and you will hear a beep. The phone returns to standby mode.
Resetting the New Message LED
If the LED remains on after you’ve retrieved your messages, you may need to reset the indicators. With the phone is in standby mode, press and hold find handset on the base until the paging sound stops (about 5 seconds).
[ 3 9 ] B A S I C S | w w w . u n i d e n . c o m |
