Using Hold, Conference, Transfer and Intercom


Put a call on	Press [int’com/hold]. If you leave a caller on hold
	for more than five minutes, the call will be
hold	disconnected. To return to the party on hold, press
	[	/flash] or [		].
Join a call in	To join a call already in progress, press [ /flash] or
	[	]. You can hang up normally; the other station
progress
	remains connected to the call.
	Press [int’com/hold]; the call will automatically be
	placed on hold. Use [ ] or [ ] to select the
	station you want to transfer the call to, and press the
Transfer a call	OK soft key. (To page all stations at once, select
	ALL.) When the other station answers, you can talk
	to the station; the outside call remains on hold. If the
	other station accepts the call, you will be
	disconnected.
Cancel a	To cancel the transfer and return to the call, press
transfer	[	/flash] or [		].
	To answer the page and speak to the transferring
Accept a	station, press [			/flash] or [int’com/hold].
transferred call	To accept the call and speak to the caller, press
	[	/flash] again.
Make an	With the phone in standby, press [int’com/hold].
	Use [		] or [	] to select the station you want to
intercom page	talk with, then press the OK soft key. (If you select
	ALL, all other stations will be paged.)
Cancel a page	To cancel the intercom page, press the CANCEL soft
	key.

Answer an	Press [		/flash] or [int’com/hold]. If AutoTalk is
intercom page	on, the handset automatically answers the page
	when you remove it from the cradle.

Uniden TWX977 manual Using Hold, Conference, Transfer and Intercom