=
Scanning
SCAN
Turn on the power, or press C. SCAN)to start scanning. (When the scanner is turned on, it is automatically in Scan mode.)
Scanning stops on any active channel automatically,
except those channels programmed with ~ | . |
Scanning resumes automatically 2 seconds after the channel becomes inactive.
Press C.MANUAL)any time to stop scanning. When you press
~, you are out of Scan mode, and the scanner remains on the displayed channel.
Pres~ c:scAN)to start scanning again, or press ~ | to |
step up 1 channel. |
|
You can press ~ repeatedly to manually scan all 16
channels, 1 press per channel, including the channels that are locked out.
Direct Chan nel Access
This feature allows you to instantly access a specific channel you want to monitor.
Example: Select Channel 4.
G) (i) IPressG).
CDCD
om
Press C. MANUAIJ .
SCAN
When you press~, the display changes to "4", but the scanner still monitors the
previous channel displayed. You must press C. MANUAL)to successfully complete the direct access to Channel 4.
10
