Setting the Squelch
1. Turn until hiss heard.
This action lowers the "squelch gate," allowing all signals and noise to get through.
No signal should be present when adjusting squelch.
Scanner doesn't scan with squelch open.
I 2. Turn just until hiss stops. | This action raises the | |
| ||
| "squelch | gate," allowing |
| only strong signals to get | |
| through. |
|
| Scanner | should begin |
| scanning | after two |
| seconds. |
|
| Note: You must have at | |
| least one channel | |
| programmed before the | |
| UBC60XL T willscan. | |
Scanning Programmed | Channels | |
Turn the scanner on. |
|
|
| Channel | numbers |
| advance | rapidly. |
3 | Note: When you turn the | |
scanner on, it willalways | ||
be in Scan mode. | ||
e ;C.i); :(
/'
(::MAK> 4
12
