3.Plug the power plug into a 120 volt AC (standard indoor) power outlet or surge protector.
4.Press and hold POWER to turn the unit on or off. Let the monitor charge for 6 hours prior to first time use so the
5.Out of range displays until you turn on the camera, .
CAMERA INSTALLATION
The UBR223 camera and mounting clip are a complete unit. The UBR223 does come with a separate suction cup bar. With it installed, you can mount the camera on glass or smooth metallic surfaces.
Placement Considerations
••
••
The camera included with your monitor is NOT weatherproof; it is an indoor camera.
The clearest
••
••
Avoid having a direct light source in view of the camera (ceiling or floor lamps).
Carefully plan where and how the camera will be positioned, and where you will route the cable that connects the camera to the power adapter. Place it a minimum of 3 feet from the crib.
•• When you are positioning the camera, bring the monitor along; it’s much easier to get the camera into the right position when you have the display handy. Check the image on the monitor before you install the camera.
•• Out of range displays when the camera is out of range, turned off, or unsuccessfully paired to the monitor. It also displays when the monitor is out of range.
You can install additional cameras (maximum of 4 cameras). When adding cameras that were not included in the original box, you will need to pair the cameras with the monitor. Refer to page 29.
9