CONNECTING TO A TV

Connect the supplied video interface cable from the A/V OUT terminal on the digital camera to the AUDIO and VIDEO input terminals on the TV.

Yellow plug

To the VIDEO input terminal

To the A/V

White plugOUT terminal To the AUDIO input

terminal

Supplied dedicated video interface cable

Switch input to VIDEO

Playback

i After connecting the digital camera to the television, set the TV input switch to VIDEO input.

i When an dedicated video interface cable is connected, no image appears on the camera’s monitor.

i The playback method is the same as when viewing images on the camera’s monitor.

i The same playback procedure as when playing back with the camera is used to play back voice memos and audio recordings as well.

Voice memo playback: see page 32Audio playback: see page 57

CAUTION

Insert and pull out the cable carefully

i When connecting the cables, make sure that the cable plugs are correctly oriented and that they match the shapes of the terminal sockets on the devices. Push the plugs in straight when connecting them. If undue force is used to connect a cable, it may permanently damage the connector pins in the terminal socket.

i Do not use excessive force when connecting and disconnecting cables.

English 98