CHARGING THE BATTERY PACK
About the CHARGE indicator

CHARGE indicator

The CHARGE indicator shows the status of

 

the battery pack and the charger.

 

Please refer to the following table if the

 

indicator flashes abnormally.

 

CHARGE indicator

Not lit

Not connected properly

 

i To recharge the battery pack, the power cord of the

 

charger must be connected to a power outlet, and the

 

plug at the other end inserted in the charger’s power

 

socket (page 13).

 

i The battery pack is not installed, or it is not installed

 

correctly (page 13).

 

Recharging finished

Lit red

Recharging

 

 

Red

Problem with the battery pack or battery pack charger

flashing

i Immediately remove the battery pack from the charger.

 

i Do not use an abnormal battery pack. (The usable life of

 

the battery pack has probably expired.)

About the internal backup battery

i This camera’s internal battery serves to maintain the date and time settings, as well as the shooting settings. The backup battery will be fully charged when the battery pack is kept in the camera continuously for about 2 days. In the fully charged state, the backup battery will maintain the camera settings for about 7 days.

When not using the camera for a long time, remove the battery pack

i A small amount of power is still used even if the digital camera is turned off, and it is therefore recommended that the battery pack be removed from the camera if it is not going to be used for a long time. Note that when the battery pack is removed for a long period, the time and date settings may be cleared. Before using your camera again, be sure to confirm that the camera settings are correct.

15English