CONNECTING TO A COMPUTER

For Windows XP usersMounting your camera1 Set the camera to the card reader mode (page 101).

hThe message [Found New Hardware] appears in the task tray,

showing that the camera is recognized as a drive.

hThe card is recognized (mounted) as a disk, and the [Removable disk (E:)] window opens.

*The drive name (E:) may be different on your computer.

2 Select an action.

hSelect the desired procedure from the [UDC-7M (E:)] window.

Dismounting the camera

CAUTION

i To disconnect your camera, be sure to follow the procedure below. Failure to follow this procedure may cause faulty operation of your computer or loss of card data.

1 Left-click on the icon for safely removing hardware.

hA list appears showing the devices connected to the computer’s USB connector.

2 Left-click on the camera drive (E:).

hThe camera can now be disconnected.

*The drive name (E:) may be different on your computer.

103English