Changing to a Different Camera, No Signal | Uniden UDW-10003

Changing to a Different Camera

►On the receiver, press to cycle through the enabled channels from CAM1 through CAM4. After the last enabled channel, the receiver goes back to the first camera.

1

2

3

4

►Each time you press , the receiver goes to the next enabled channel, regardless of whether there is a camera present on that channel. If there is no camera signal on a particular channel, the receiver shows a black screen with the message No Signal.

1

2

3

4

NO SIGNAL

►You should only turn a channel On if you have a camera paired to that channel.

►The receiver skips any channels that are set to Off in the menu.

1

2

3

4

(Channel CAM2 set to Off.)

14

Image 14

Uniden UDW-10003 user manual Changing to a Different Camera, No Signal

Contents

What’s in the Box If You Contact Uniden’s Phone Number Important Safety Instructions Contents Charge the batteries Connect the PowerGetting Started Try Check the Video Signal Icon What it means What the buttons do Learning Your SystemGet to Know the Camera What the lights mean Using the camera mount Mounting Camera screw brace Post Lock Screw holes Get to Know the Receiver Speaker Connector Use it to What the connections do Using the Menu Right Using Zoom Mode Understanding Night Vision Connecting to Your TV Reducing pixellation Some things to know about pairing cameras Multiple Camera FeaturesPairing Cameras No Signal Changing to a Different Camera Setting Up a Scan Using Quad Display To enter quad display Solving Problems If… Try Possible Cause Solution Unstable or Weak SignalWeak signal and video performance Noise or Static Resetting Your System Resetting the camera Resetting the receiver System Specifications Camera Receiver Product SpecificationsImage Specification Additional Information Polymer-Lithium Battery Warning Recycling and Disposal Information CE Compliance Information FCC Compliance InformationIC Compliance Information One-year Limited Warranty