UNIDEN Model
Operation
Setting the FM Squelch
Turn the unit ON by rotating the volume control clockwise. Turn the outer ring of the control to adjust the Squelch.
You must select a channel which is not in use before setting the SQUELCH control. (see p.7)
UH012
A S C Technology
Advanced Signal Clarity
TX SCAN DUP
Think of the squelch control as a gate. If you turn the squelch fully clockwise it raises the ‘Squelch Gate’ so high that no signals get through.
If you turn Squelch fully counterclockwise it lowers the ‘Squelch Gate’ to the extent that all signals get through – weak, medium and strong signals and noise.
To set the ‘Squelch Gate’ to the desired level, turn the squelch knob counterclockwise until you hear noise. Then carefully turn the Squelch knob clockwise until the noise fades. Now only strong signals get through.
4
