Uniden UH012 manual Operating the UH-012 in Duplex Mode, Scanning open scan, Open Scan OS Mode

UNIDEN Model UH-012 CB Radio

Operation

Operating the UH-012 in Duplex Mode

For this example we are adopting CH01 as the channel being used in your area for repeater use.

Press to switch Duplex On. The DUP LED is turned on.

If Duplex is not required press	again to	UH012
switch Duplex off.		A S C Technology

Only channels 01-08 are available for Duplex	Advanced Signal Clarity
	TX SCAN DUP
Check with your local Retailer for
information on available Repeaters

Scanning (open scan)

The UH-012 has a scanning feature that allows you to search for active channels automatically.

Press and scanning starts.

The SCAN LED is turned on.	UH012
	A S C Technology
	Advanced Signal Clarity
	TX SCAN DUP

Open Scan (OS) Mode

Allows continuous scanning of all channels in ascending order. If an active channel is found, scanning will stop on that channel.

If the received signal ceases, the unit will wait 3 seconds for the signal to return, otherwise scanning resumes.

To deactivate SCAN, press or the PTT button on the microphone.

If SCAN is deactivated while on an active channel, the UH-012 will stay on that active channel. If no channels are active, the UH-012 will reinstate the starting channel.

UH012

A S C Technology

Advanced Signal Clarity

TX SCAN DUP

6