Uniden uh078sx manual Squelch

SQUELCH

The squelch is used to eliminate any annoying background noise when there are no signals present.

Make sure to first select a channel not in use before setting the squelch in your uh078sx UHF-CB radio.

Think of squelch as a gate. Turn [SQ] fully clockwise. This raises the "Squelch Gate" so high that only the very strong signals can get through.

Turn [SQ] fully counter clockwise until you hear a hiss. This opens the "Squelch Gate" so that everything gets through noise, weak signal, and strong signals.

To set the "Squelch Gate" to the desired level, turn [SQ] counter-clockwise until you hear noise. Then turn the [SQ] clockwise just until the noise stopped. Now only the desired signal can get through.

Strong Signals

Medium Signals

Weak Signals

Noise

UH078SX

If an incoming signal is very weak there is a possibility that you will have a choppy or broken reception, due to the sensitivity of the squelch. In this case, simply rotate the [SQ] clockwise until the weak signal is heard clearly.

10