If SCAN is deactivated while in an active channel, the uh078sx will stay on that active channel. If no other channels are active, the uh078sx will reinstate the starting channel.
Group Scan (GS) Mode
Allows you to monitor a Priority Channel while scanning.
To use GS Mode Scanning, press and hold the | key. GS appears on the |
display. |
|
GS Scanning checks the Priority channel activity regularly.
If GS Scanning is initiated when there are no channels programmed in GS memory, an error tone will be heard and scanning will not start.
If the Priority channel becomes active the radio will stay on that channel for as long as the signal is present. If the received signal ceases, Priority scanning continues after 3 seconds.
If scanning stops on a channel which is not a Priority Channel the uh078sx will continue monitoring the Priority Channel for activity while listening to the active one.
To deactivate SCAN, press | or PTT . |
If SCAN is deactivated while it is turned to an active channel, the uh078sx will stay on that active channel. If none of the channels are active, the uh078sx will reinstate the scan start channel.
14
