Uniden UH400SX-RM, UH500SX-RM owner manual Priority Watch, Add/Remove Channels from Scan Memory

Models: UH500SX UH400SX-RM UH400SX UH500SX-RM

1 36
Download 36 pages 29.84 Kb
Page 26
Image 26

UNIDEN Model UH400SX, UH400SX-RM, UH500SX, UH500SX-RM OM

Operation

Priority Watch

To switch Priority Watch On/Off;

1.Press [MENU/ENTER] two times. The Priority Watch setting flashes.

2.Turn the Rotary Channel Selector at the base or press on the Remote SPK/MIC to change the setting between ON or OFF.

3.Press [MENU/ENTER] to store the setting.

4.Press and hold [MENU/ENTER] to exit from the menu mode.

If SCAN is deactivated while it is tuned to an active channel, the UHF CB Radio will stay on that active channel.

If none of the channels are active, the UHF CB Radio will reinstate the scan start channel.

If OS/GS Scanning is initiated when there are no channels programmed in OS/GS memory, an error tone will be heard and scanning will not start (see Programming Scan Channels - below).

Add/Remove Channels from SCAN Memory

Select which Scanning Mode you wish to use - OS or GS.

Select the channel you want to store.

Press to [MEM] store. MEM icon appears and a short tone beep is heard.

To remove the channel from SCAN memory, press [MEM] once more.

The MEM icon disappears.

24

uh400sx, uh500sx, uh400sx-RM, uhSec1:24 Sec1:24

1/2/08 1:31:28 PM

Page 26
Image 26
Uniden UH400SX-RM, UH500SX-RM owner manual Priority Watch, Add/Remove Channels from Scan Memory