|
| GPS NMEA0183 | Ground Wire Color | |
GPS MGF. | Model Number(s) | OUTPUT Wire Color | ||
(connect to BARE | ||||
(Connect to YELLOW | ||||
|
| WIRE on your radio) | WIRE on your radio) | |
|
|
| ||
Northstar | All Models | Yellow | Black | |
RayMarine | 420 | Yellow | Brown | |
RayMarine | 520 / 620 | Blue | Brown | |
RayMarine | RL Series | White | Brown | |
Simrad | All Models | White | Brown | |
Sitex | Neptune, | Gray | Brown | |
Nautilus | ||||
|
|
| ||
Standard | CP150 / CP150C | Green | Yellow |
3.Be certain all wire connections are secure and that all open wires are adequately covered.
##NOTE: To extend the life of the radio, use waterproof tape to seal electrical connections.
GPS Verification
If the GPS receiver is correctly connected and it transmits valid data, the display shows GPS Data OK. Press
Date
Course
Latitude
Longitude
Status
| Time |
|
|
06/20 | 11:00:00 | 16 | channelCurrent |
208o | 30. 0 KT | ||
35o | 40. 610 N |
|
|
139o | 46. 564 E |
| Speed |
GPS Data: External |
| ||
If the GPS does not send coordinates within 30 minutes, an audible alert sounds once and the display shows Input GPS. This message remains until the coordinates are updated.
After 4 hours, the audible alert sounds again if no coordinates are received and the GPS is
connected. After 23.5 hours, the radio deleted the current coordinates and displays Input GPS.
See page 20 to manually set the GPS coordinates.
Configuring the GPS
If the radio is receiving valid GPS data, it will automatically set the clock to your local time based on the GPS location. You can adjust your local time forward or back one hour if necessary (for example, if you are close to the border of a time zone); you can also adjust for Daylight Savings Time.
30English
