Uniden UM380BK 07

8

English

Normal mode with both Weather Alert and Triple/Dual Watch

You can activate Weather Alert Watch and

Triple/ Dual Watch at the same time. The

radio performs both checks at their

scheduled time.

scan mode

You can save channels into memory and

then use scan mode to monitor those

channels. When the radio detects a signal on a channel, it pauses on that channel as long as

the signal is received; when the transmission stops, the radio will continue scanning.

In scan mode, you can get the

following information from the

display (some indicators will

not always be displayed).

Using the radio in scan

mode

xYou cannot transmit while

in scan mode.

xYou must have two or more channels in memory to start a scan.

xTo save a channel into memory, select the channel, then press and hold

WX-MEM

for two

seconds. Memory will show on the display.

xTo remove a channel from memory, set the radio to that channel, then press and hold

WX-

MEM

for two seconds. Memory will no longer show on the display.

xTo activate scan mode, press and hold

CLR-SCAN

. Press and hold

CLR-SCAN

again to return

to the previous mode.

xWhen the radio automatically stops on a channel, press

CHANNEL UP

to leave that channel

and resume scanning.

xTo end the scan, press the microphone’s

PUSH TO TALK, CALL-MEM,

or

WX-MEM

buttons. The

radio remains on the last scanned channel.

wx

WX Alert : Every 7 seconds,

the radio checks the most

recently-used weather channel.

09 16 09 16 09 16

Triple Watch: Every 2 seconds,

the radio checks channels 9 & 16.

Monitoring Channel 25

11

1008 1312 17

15 20

14

The radio scans about

5 channels in 1 second.

When it detects a signal, the radio stays on the

channel until you press the CHANNEL UP button or the

signal stops.

Resume scan

1 Watt USA

Memory

Scanning Channels

01A,05A,06,07A,08

07 A

Transmit power

last used

Channel mode

(USA, CANadian,

or INTernational)

Current channel

being scanned

Scan list (if the

text is too long,

the line scrolls)

All scanned

channels must

be in memory

Normal scan

mode or Triple/

Dual-watch on

Status

icons

Contents

Main Making a Distress Call #nOte: if the radio displays Enter User MMSI, cancel the automatic Making a Voice Distress Call Faire un appel De Dtresse #reMarQue : si la radio affiche enter user MMsi (entrer lisMM de Faire un appel de dtresse vocal CMO haCer una llaMaDa De apurO #nota: si la radio exhibe (Inserte el MMSI del usuario), cancele la Cmo hacer una llamada de apuro por voz Contents Page intrODuCtiOn getting starteD Whats included parts of the radio parts of the Microphone turning on the radio Seng the UIC Channel Mode (USA/CAN/INT) hOW it WOrks Setup USA/CAN/INT UIC Channels USA Mode Canada Mode Intl Mode Select[ENT] #nOte: You are required to monitor channel 16 whenever your boat is underway. You should Normal mode operaon Marine Operator 25 Watts USA Memory Alert GPS Data OK xTo transmit, press and hold xFor the best sound quality, hold the microphone about two inches from your mouth while xTo change the transmit power, press and hold the xPress scan mode 07 xYou cannot transmit while xTo end the scan, press the microphones xWhen the radio automatically stops on a channel, press xTo activate scan mode, press and hold Weather mode Hurricane Warning Weather Band Alert xYou cannot transmit while in weather mode. xTo enter weather mode, press xWeather mode can filter out alerts that do not affect your location if the location code using YOur raDiO using Your radio xAn arrow on the left side indicates the current selection. xPress xPress xFrom any menu screen, choose Exit or press and hold xPress Making a voice MaYDaY call #nOte: setting the squelch level too high may prevent you from hearing weaker Changing the channel xTo prevent stuck microphone problems or situations where Making a transmission #nOte: Dont forget to change the transmission setting back to 1 Watt when you move closer #nOte: By default, when you change to channel 16, the radio automatically boosts the Choosing triple Watch or Dual Watch using Fips codes for weather alerts xFor more information about how the NWS uses FIPS codes, see the NWS website: www. xTo see an index of FIPS codes by state, see the website of the National Institute of Changing display and sound opons Seng the GPS posion manually #note: if the #nOte: Be certain any manually-entered position is correct. if you enter the wrong position USING DIGITAl SeleCTIve CAllING (DSC) FeATUReS What is DsC? advanced DsC features What is an MMsi number? [New] #nOte: Be sure you have the correct user MMsi number before entering it in the radio. the User MMSI #nOte: Be sure you entered the number correctly before confirming the entry. You can only 00_______ Group MMSI using the Directory Group MMSI Making DsC Calls xThroughout the race, you use xA power boat full of xYou see a rowboat entering xWhen the other station accepts the call, both radios switch to the selected response xIf the other station cannot respond on the channel you selected, the radio displays Not Making an automac distress call receiving a DsC call test Calls #nOte: Many coastal stations have specific frequencies and MMsi numbers you should use Test [Manual] JIM CASSIDY KENT NEWMAN Test Test 123456789 Send Cancel Test Acknowledged 123456789 Completed Back[CLR] Test 123456789 Reply Cancel Posion Request and Reply Test Reply Auto Manual POS Request KENT NEWMAN Reply Cancel Pung the radio into standby A Disabling automac channel switching #nOte: use this feature with caution. Deactivating automatic switching and then forgetting it installing the harDWare Mounng the radio xProperly support the weight of the radio, approximately 2.2 pounds or 1.0 kilograms. Connecng the radio xproviding it with power from the boats xconnecting a VHF-FM marine antenna to the antenna connector Connecng to a GPS receiver 06/20 11:00:00 208o 30. 0 KT 35o 40. 610 N 139o 46. 564 E GPS Data: External Connecng to a Chartploer Setup Connecng to an external Speaker xMinimum impedance of 4 Ohms xMinimum power handling of 10 Watts xIf the antenna has been damaged, you should not transmit except in the case of an engine noise suppression speCiFiCatiOns Radio Specicaons reFerenCe taBles #this radio does not support ais channels. Channel descripons and what they mean us Marine Channels and Frequencies Canadian Marine Channels and Frequencies Page Internaonal Marine Channels and Frequencies Page Weather Channels and Frequencies (us, Can, and int) emergency Alert System (SAMe) Informaon xA WARNING is an event that alone poses a significant threat to public safety and/or xA WATCH meets the classification of a warning, but either the onset time, probability of xAn EMERGENCY is an event that, by itself, would not kill or injure or do property damage, Page Page #nOte 1: if the radio receives only a gll sentence, the radio does not display the current #note 2: if the radio receives both rMC and gll sentences, the radio uses only the rMC #note 3: status data is used to check whether the gps data is valid or invalid. #nOte: When the radio receives a distress call, it outputs a sentence in the following format. 45 English Regulaons and Safety Warnings Marime radio services operaon Basic radio guidelines FCC Informaon lead warning three Year limited Warranty