![](/images/new-backgrounds/1309499/309499105x1.webp)
Troubleshooting
If your :+!#"#Cordless Telephone is not performing to your expectations, please try these simple steps. If you are still unable to resolve the problems, contact Uniden Customer Service at (800)
Problem | Suggestion |
|
|
Charge light won’t come on when Handset | ∙ Make sure AC Adapter is plugged into the |
is placed in Base Unit. | Base Unit and wall outlet. |
| ∙ Make sure Handset is properly seated in |
| Base Unit. |
| ∙ Make sure that the charging contacts on |
| the Handset and Base Unit are clean. |
Audio sounds weak and/or scratchy. | ∙ Make sure that the Base Unit antenna is |
| fully extended and vertical. |
| ∙ Move the Handset and/or Base Unit to |
| different locations and try again. |
| ∙ Press the CHAN button to select another |
| channel. |
Can’t make or receive calls. | ∙ Check both ends of the Base Unit |
| telephone line cord. |
| ∙ Make sure the AC Adapter is plugged into |
| the Base Unit and wall outlet. |
| ∙ Disconnect the AC Adapter for a few |
| minutes, and then reconnect it. |
Handset doesn’t ring or receive a page. | ∙ |
| weak. Charge the battery on the Base |
| Unit for 15 – 20 hours. |
| ∙ Set the RING ON/BATT SAVE switch on the |
| Handset to RING ON. |
| ∙ Extend the Base Unit antenna vertically. |
| ∙ The Handset may be too far away from |
| the Base Unit. |
| ∙ Place the Base Unit away from noise |
| sources. |
| ∙ The Digital Security Code may be erased. |
| Set the Digital Code. |
Base Unit doesn’t ring or receive a page. | ∙ Set the Base Unit Ringer switch to LO or |
| HI. |
53