2. Make sure the CHARGE LED |
lights. If the LED doesn’t light, |
check to see that the AC |
NEW MESSAGE
Adapter is plugged in and |
that the Handset is making |
good contact with the Base |
IN USE
BATTERY
STOP REPEAT
Unit charging contacts. |
Continuous Battery Charging
CHARGE | DELETE | ANS ON/OFF |
POWER |
|
|
For the best battery performance, return the Handset to the Base Unit at the end of the day to keep the battery fully charged.
Low Battery Indicator
When the Battery Pack in the Handset is very low and needs to be charged, the TALK/BATT LOW LED flashes.
TALK | TALK | |
| ||
1 | BATT LOW | |
2 | ||
1 | ABC | |
2 | ||
| ||
| 7 | |
GHI | JKL | |
4 | 5 | |
4 | a | |
PRS | TUV |
7 8
REMOTE
1
DEF
3
3
MNO
6
9
WXY
9
If the TALK/BATT LOW LED begins to flash, the phone is programmed to eliminate its functions to save power. The table below describes what to do to return your phone to normal operation.
During a Call | In Standby Mode |
|
|
Only the T button operates. | None of the buttons will operate. |
|
|
The Handset beeps and the | The Handset TALK/BATT LOW LED |
TALK/BATT LOW LED flashes once | flashes once every three seconds. |
every three seconds. |
|
Complete your call as quickly as | You will not be able to make a call. |
possible. |
|
|
|
Return the Handset to the Base | Return the Handset to the Base |
Unit for charging. | Unit for charging. |
Note: Allow 15 to 20 hours without interruption for the Handset to fully recharge.
26
