Uniden XS1415/1415+1 guide

Installing the Rechargeable Battery Packs into the Handsets

Each handset is powered by a rechargeable battery pack. Once installed, the battery charges automatically when the handset is placed in the base or charging cradle (XS1415+1 only).

To install the rechargeable battery pack:

1)Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove.

2)Plug the battery pack connector (red & black wires) into the small jack inside the battery compartment. (The connector notches fit into the grooves of the jack only one-way.) Match the wire colors to the polarity label in the battery compartment, connect the battery, and listen for a click to insure connection.

3)Make sure you have a good connection by slightly pulling on the battery wires. If the connection is secure, the battery jack will remain in place.

4)Place the battery case cover back in the handset by sliding it upwards until it clicks into place.

Note: Use only the Uniden (BT-905s) rechargeable battery pack supplied with your phone.

XS1415+1 OM.indd 8

21/5/08 10:34:51 AM

Image 9

Uniden XS1415/1415+1 owner manual Installing the Rechargeable Battery Packs into the Handsets

Contents

XS1415/1415+1 Contents Welcome Manual Conventions Terminology Product Overview Main Phone Features XS1415+1 Handset Controls and Functions Extra Charging Cradle XS1415+1 only Main Base UnitFind key TEL Line jack Choosing the Best Location Installing the Phone Installing the Rechargeable Battery Packs into the Handsets Installing the Base Unit and Charging Cradle XS1415+1 only XS1415+1 OM.indd 21/5/08 103510 AM Standard wall plate mounting Mounting the Base Unit on a Wall 3mm 100m 35mm Direct wall mounting XS1415+1 OM.indd 21/5/08 103514 AM When to Re-register Handsets XS1415+1 only Activating AutoTalk Basic Setup Activating Caller ID on Call Waiting Handset No.1 only Setting Name Tag POP ID Setting Insert Using the Speed Dial Memory Storing a Name and Number in Memory Number of times key is pressed If you make a mistake while entering a name Storing Caller ID in Speed Dial Memory Using Your Phone Making and Receiving CallsMaking a Call from Speed Dial Memory Making a Call from the Caller ID List To cancel speed dialing Transferring a Call XS1415+1 only Easy Dial New Zealand onlyTo transfer a call To receive a transfer call Adjusting the Earpiece Volume Selecting the Ring Tone and VolumeRedialing the Last Dialed Number Temporarily Mute Ringer Using Call Waiting Selecting a Different ChannelFind Handset To access your voice mailbox Voice Mail Waiting Indicator Caller ID and Cidcw Caller ID on Call Waiting Viewing the Caller ID Message List Caller ID on Call Waiting Cidcw Deleting a Caller ID message Deleting Information from the Caller ID ListDeleting all Caller ID names/numbers Press delete/transfer XS1415+1 or delete/channel XS1415 Changing the Digital Security Code For XS1415For XS1415+1 Maintenance SpecificationsPower Failure Talk and Standby Times Low battery alert Cleaning the battery charging contacts Battery replacement and handling Common Issues TroubleshootingSymptom Suggestion Traveling Out-of-Range Re-register both handsets see Call was answered before the second ring Handset Base Liquid Damage G, H IndexK, L O, P, Q XS1415+1 OM.indd 21/5/08 103543 AM Element of Warranty One Year Limited Warranty Uniden Australia Pty Limited/Uniden New Zealand Limited