The paging feature does not work when the phone is in use.
SELECTING A DIFFERENT CHANNEL
If you encounter interference while using your phone you can manually change the phones channel for clear operation. Interference can come from
appliances or other phones in your home. This function works only when the phone is in use.
The chan button on the handset allows you to choose between factory set channels (10 AUS/25NZ).
During the course of a conversation, if you hear static or noise which makes it difficult to hear, press chan. The talk LED flashes, indicating the phone is changing to another channel.
USING THE PAGE/FIND FEATURE
The Page/Find feature sends a signal from the base to the handset causing it to beep. This is useful for locating the handset when it is away from the base. To use this feature, press page/find on the base. The handset beeps for 60 seconds.
On the handset press any key (except talk button) or press page/find button on the base to end the page.
TRAVELLING OUT OF RANGE
When you begin to move too far from the base, you will first hear a clicking sound. As you travel further out of range, the voice transmission will begin to break up. If you pass the range limits of the base, your call will terminate.
17
