The battery connector will fit together only one way. Make sure the connector is properly aligned. Use only the Uniden battery pack (model BT-434)

Replace the handset on the base after use if convenient. However recharging the battery is only necessary when the low battery indicator is lit. On a monthly basis use the phone until the low battery indicator appears. Then charge the battery for 15-20 hours.

Charging the Battery Pack

The rechargeable Nickel-Cadmium battery pack must be fully charged before using your phone for the first time. Before plugging the phone line into your new phone, you must charge the battery for approximately 15-20 hours without interruption.

1.Remove the Handset battery cover.

2.Plug the battery’s cable into the handset and place the battery pack inside the battery compartment.

3.Replace the battery cover.

Charging the Handset

Place the handset on the base to charge. (The handset will charge only in the face- down position.)

Low Battery Indicator

When the battery pack in the handset is low and needs

to be charged, the talk/batt LED flashes every 3 seconds.

If this occurs while you are on the phone, you will hear an alert tone. Complete your call as quickly as

possible, and return the handset to the base for charging.

Cleaning the Battery Contacts

To maintain a good charge, it is important to clean all battery contacts on the handset and base about once a month. Use a pencil eraser or other contact cleaner. Do not use any liquids or solvents, or abrasive materials.

contacts

9

Page 11
Image 11
Uniden XS610 manual Charging the Battery Pack, Charging the Handset, Low Battery Indicator, Cleaning the Battery Contacts