Memory Dialing

EDITING A STORED NAME AND PHONE NUMBER


1.	Press and hold		. 'Memory Store' is displayed.
2.	Press	or	, or enter a number ( 0			- 9 ) to select the memory location you would like to edit.
3.	Press	. The memory location is displayed.
4.	Press	to select 'Edit Memory'. The cursor flashes indicating that the display is ready for the name to be edited.
5.	When a name has not been stored, the cursor appears at the beginning of the second line.
	Use the number keys,			,	, or transfer /delete to edit the name. To edit only the phone number, skip this step.
6.	Press	. The cursor flashes indicating that the display is ready for the number to be edited.
7.	Use the number key,			/pause and transfer /delete to edit the phone number. The phone number cannot exceed 20
8.	digits. If you don't want to change the phone number, skip this step.
	Press	. You hear a confirmation tone. Memory Storage is complete. For example, if you store a name and number
	into memory location number 1, the display shows 'Memory 1 Stored'. After about 2 seconds, 'Memory
	Store' is displayed.
9.	Press	to return to standby mode.

1.	Press and hold		. 'Memory Store' is displayed.
2.	Press	or	or enter a number ( 0 - 9 ) to select the memory location you would like to erase.
3.	Press	.
4.	Press	to move the pointer down to 'Delete Memory'.
5.	Press	.
6.	Press	to move the pointer to 'Yes'.
7.	Press	. A confirmation tone is sounded.
8.	After about 2 seconds, 'Memory Store' is displayed. You may delete the information in another memory

location (return to step 2) or press	to return to standby mode.
	Page 12