STARTEDUse only the genuine Uniden Super Chat Battery supplied with your phone. Replacement Super Chat Batteries are available through the Uniden Parts Department.
GETTINGIf you are using an optional headset, you must still use the handset keypad for phone operations.
BATTERY MAINTENANCE
Battery use time (per charge)
• 10 hours continuous use • 20 days when handset is in the standby mode.
When the Battery charge becomes low
If the phone is not in use, the 'Low Battery' flashes and none of the keys will operate. If the phone is in use, the 'Low Battery' flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base
unit for charging.
• You cannot overcharge the battery.
• You may return the handset to the charger after each call or when the battery is low.
Cleaning the charging contacts
To maintain a good charge, it is important to clean the charging contacts on the handset base unit and additional charge cradle with a dry cloth or a pencil eraser about once a month. Do not use any liquids or solvents.
INSTALLING THE BELTCLIP
To attach the beltclip: |
|
Insert the beltclip into the holes on each side of the handset. Press down until it clicks. |
|
To remove the beltclip: | Headset Jack |
Pull both sides of the beltclip to release the tabs from the holes. |
HEADSET INSTALLATION
Your phone may be used with an optional headset. To use this feature, simply plug the headset into the headset jack.
Page 5
