Uniden XS 1410 owner manual Mount the base unit on a wall, 3mm, 100mm

Models: XS 1410

1 12
Download 12 pages 46.4 Kb
Page 5
Image 5

Talk and Standby Times

With average use, your handset battery provides approximately 6 hours of talk time and approximately 12 days of standby time. When your handset is not being used and is left off of their charging cradle, the battery will gradually discharge. You can achieve optimum battery life and performance by returning the handset to the charging cradle after each use. If the handset is left off of the charging cradle, the actual talk time duration will be reduced respective to the amount of time the handset is off of the charging cradle.

D. Mount the base unit on a wall

Standard wall plate mounting

This phone can be mounted on any standard wall plate.

1) Plug the AC adapter to the DC IN 9V jack.

2) Plug the AC adapter into a standard 240V AC wall outlet.

3) Plug the telephone cord into the TEL LINE jack.

4) Route the telephone cord through the groove as shown.

5) Plug the telephone cord into the telephone outlet.

6) Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is firmly seated.

Direct wall mounting

If you don’t have a standard wall plate, you can mount your phone directly to the wall.

Before doing this, consider the following:

 

 

 

 

• Avoid electrical cables, pipes, or other items behind

 

 

 

 

the mounting location that could cause a hazard when

 

 

3mm

inserting screws into the wall.

 

 

 

 

 

• Try to mount your phone within 1.5m of a working

 

 

 

 

 

 

 

 

 

 

 

 

 

 

phone jack to avoid excessive cord lengths.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Make sure the wall material is capable of supporting the weight of the base and handset.

Use #10 screws (minimum length of 35mm) with

 

 

 

 

 

100mm

 

anchoring devices suitable for the wall material where

 

 

 

 

 

 

 

 

the base unit will be placed.

 

 

 

 

 

 

 

1)

Insert two mounting screws into the wall, (with their

 

 

 

 

 

 

 

 

appropriate anchoring device), 100mm apart. Allow

 

 

 

 

 

 

 

 

about 3mm between the wall and screw heads for

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

mounting the phone.

 

 

 

 

 

 

 

2)

Refer to steps 1 through 6 above to mount the

 

 

 

 

 

 

 

 

telephone.

 

 

 

35mm

 

 

 

 

 

 

1410 OM.indd 4

3/6/08 2:01:31 PM

Page 5
Image 5
Uniden XS 1410 owner manual Mount the base unit on a wall, 3mm, 100mm