STARTEDIf you are using an optional headset, you must still use the handset keypad
MOUNTING THE BASE UNIT ON A WALL
Direct Wall Mounting
You can mount your phone directly to the wall. Before doing this, consider the following:
•Avoid electrical cables, pipes or other items behind the mounting location that could cause a hazard when inserting screws into the wall.
•Mount your phone within distance of a working phone jack.
•Make sure the wall material is capable of supporting the weight of the base and handset.
•Use screws with anchoring devices suitable for the wall material where the base unit will be placed.3mmTOP
1. | Insert two mounting screws into a wall (with their appropriate anchoring device), 85mm apart. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
2. | Allow about 3mm between the wall and screw heads for mounting the phone. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plug the AC adaptor into the Base Unit and then into a power point. |
|
|
|
|
|
|
|
|
| 85mm | |||||
3. | Plug the telephone cord into the Base Unit and then into the telephone socket on the wall. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4. | Align the mounting slots on the base with the mounting posts on the wall. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5. | Then push in and down until the phone is firmly seated. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GETTING
for phone operations.
INSTALLING THE BELTCLIP
To attach the beltclip:
Insert the beltclip into the holes on each side of the handset. Press down until it clicks.
To remove the beltclip:
Pull both sides of the beltclip to release the tabs from the holes.
HEADSET INSTALLATION
Your phone may be used with an optional headset. To use this feature, simply plug the headset into the headset jack.
Page 5
35mm
Headset Jack
