Uniden XSA 975 Storing Phone Numbers, Between the digits. Use to delete digits as needed

DIALINGIn memory dialling operation, you must press a key within 30 seconds or the phone will return to standby.

The pause feature is useful for long distance

MEMORYcalling, credit card dialling or sequences of numbers that require a pause between digits.

There is no memory store in the Base Speakerphone.

STORING PHONE NUMBERS

Memory Dialing allows you to dial a number using just a few key presses. Your XSA975 stores up to 10 names/numbers in each handset.

1. Press and hold , 'Memory Store' is displayed.

2. Press or or enter a number ( 0 - 9 ) to select the memory location where you would like to store the number.

3. Press . 'Store Name' is displayed on the screen and a cursor flashes indicating that the display is ready for a name to be entered.

If the screen shown to the right appears, the selected memory location is already stored. Then you must either edit the entry in this location, delete the entry in this location (page 13) or select "Go Back" to choose another location.

4. Use the Alpha Numeric keys to enter a name. The name cannot exceed 14 characters.

•Use and to move the cursor to the desired location.

•Use to delete characters as needed.

•Press and hold to delete all the characters.

•If a name is not required, go to step 5.

5.Press , 'Store Number' is displayed. The cursor flashes indicating that the display is ready for the number to be entered.

6.Use the number keys to enter the phone number. The phone number cannot exceed 20

digits. Use the /pause to enter a pause in the dialing sequence if required. The display shows a 'P'. Each pause counts as one digit and represents a two second delay of time

between the digits. Use to delete digits as needed.

7.Press , you will hear a confirmation tone, and the following screen appears. Memory storage is complete. For example, if you store a number into the memory location number 1, the display shows 'Memory 1 Stored'. After about 2 seconds, 'Memory Store' is displayed. Repeat steps 2-7 to store more numbers.

8.Press to return to standby mode.

Page 11

Memory Store

1

2

Store Name

Edit Memory 1

Delete Memory 1

Go Back

Store Number

Store Number 8002971023

Memory 1 Stored

Memory Store

1 UNIDEN AUS

2 <Memory 2>