Uniden XSR917/918 Making Calls with Memor Y Dialing, Memory Dialing from Talk Mode, Chain Dialing

MAKING CALLS WITH MEMOR Y DIALING

Memory dialing from Standby Mode.

1.	Press	. The handset displays your programmed memory locations.
2.	Press	or	, or enter the number ( 0	-	9 ) to select the memory location you
3.	would like to dial.
	Press	'Talk' and the volume settings are displayed. Then the displayed number is
	dialed.

1UNIDEN AUS

2JOE BLOGGS

3JOHN DOE

Talk 0800123456789

DIALINGNumbers stored in one handset can not be accessed from the other. MEMORY

Display a Programmed Number

Press	. The handset displays your programmed memory locations.
Use	and	to toggle between the names and numbers displayed.
1	UNIDEN AUS		1	0800123456789
2	JOE BLOGGS		2	5452930
3	JOHN DOE		3	6567983

MEMORY DIALING FROM TALK MODE

1.	Press	. 'Talk' and the volume setting appears.
2.	Press	.	- 9 ) to select the memory location of the desired phone number. The selected phone number is displayed.
3.	Enter a number ( 0
4.	Then the number is dialed. If the memory location selected does not have a number stored, a series of beeps is sounded.
	To hang up, press		.

CHAIN DIALING

On certain occasions after dialing a number, you may be required to enter an access code such as your account number for
phone banking. You can enter this number into a memory location for later use by doing the following:
1.	Store the access code into one of the memory locations ( 0		-	9 ) following the steps on page	11.
2.	Dial the party or service main number.	followed by the memory location ( 0 -				).
3.	When you need to enter the special number, press				9

Page 12