INSTALLATION
Making a Call
Page iv
RegisteringYour2nd Handset Before Using (XSR918 only)
After fully charging the handsets, remove the handset from the
extrachargingcradle and place it on the mainbase. (The
LEDwillbegin to flash indicating registration is occurring).
Waitfor at least 5 seconds before removing the extra handset from
the base.
The registration has been completed, and your dual handset
cordlessphoneis ready for use.
status
main
l
l
Pickupthe handset and press .Dialthe phone number
OR
Dialthephone number - then press
Tohangup - press
OR
Placethehandset on the Base Unit.
Answering a Call
lHandsetonthe Base Unit:
Removethehandset from the base and
speak( ).AutoTalk
l
l
Handsetoffthe Base Unit:
Pickupthe handset, press any key and speak.
Tohangup - press
OR
Placethehandset on the Base Unit.
Call Transfers
Ifthe transferred
callis not picked
upafter 5 minutes,
thecall will be
disconnected.
TOTRANSFER CALLS (XSR918 only)
Totransfer your call from handset 1 to handset 2:
Press .
Thecall is placed on hold on the first handset, while handset 2 begins to ring.
Thecall is transferred when the 2nd handset is answered.
Repeatthe process to transfer the call back to handset 1. Calls can be transferred from either handset.
l
l
l
l
transfer