Contact 1.800.762.1142 for assistance. Do not return to place of purchase. | page no. |
9 | |
For great recipes and tips, visit recipes.uniflame.com |
|
|
|
21 Insert AA Battery
Note: Remove plastic wrapper before installing battery.
J
x 1
22 Insert Grease Cup Support and Grease Cup
Installing LP Gas Tank
To operate you will need (1)
Note: An empty standard grill LP gas tank weighs approximately 18 lbs. A
CAUTION: LP gas tank must be properly disconnected and removed prior to moving this grill.
Insert LP Gas Tank
Place precision filled LP gas tank upright into hole in grill body so the tank valve is facing the gas line connection.
Secure LP Gas Tank
Secure tank by sliding LP gas tank retainer wire over shoulder of LP gas tank.
Connect LP Gas Tank
Before connecting, be sure that there is no debris caught in the head of the LP gas tank, head of the regulator valve or in the head of the burner and burner ports.
Connect regulator/hose assembly to tank by turning knob clockwise until it stops.
Disconnect LP Gas Tank
Before disconnecting make sure the LP gas tank valve is “CLOSED”.
Disconnect regulator/hose assembly from LP gas tank by turning knob counterclockwise until it is loose.
CAUTION: LP gas tank must be properly disconnected and removed prior to moving this grill.
Need a tank of gas? Try tank exchange service. It’s easy, fast, safe, and available at tens of thousands of conveniently located retail outlets nationwide. You can purchase a new full tank or exchange your empty for a precision filled one.