Need help? 1.800.762.1142

Do not return to place of purchase.

Replacement Parts

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

page no.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

parts.BlueRhino.com /

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

1.800.762.1142

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Assembly Instructions

1

DO NOT RETURN PRODUCT TO STORE.

For assistance call 1.800.762.1142 toll free. Please have

your owner’s manual and model number available for

Installing LP Gas Tank

This fireplace is designed to operate with a one pound 16.4 oz. disposable propane gas tank (DOT 39 Cylinder).

DO NOT ATTEMPT TO REFILL ANY ONE POUND (16.4 oz.)

PROPANE GAS TANKS!

1lb 453 g

3.875 in. / 9,8 cm

cm 19,7 / .in 75.7

reference.

For Easiest Assembly:

•To avoid losing any small components or hardware, assemble your product on a level surface that does not have cracks or openings.

•Clear an area large enough to layout all components and hardware and that is soft so as to not scratch or damage any surface finishes.

•When applicable, tighten all hardware connections by hand first. Once the step is completed go back and fully tighten all hardware while being cautious not to over tighten to avoid damaging surfaces or stripping hardware.

•Follow all steps in order to properly assemble your product.

To complete assembly you will need:

•(1) Leak Detection Solution (Instructions on how to make solution are included in “Operating Instructions” section)

•(1) 16.4 oz LP gas tank.

Typical assembly: approximately 5 minutes.

2 Insert Glass Rocks

Connect LP Gas Tank

Figure 1

 

Only cylinders marked “propane” may be used.

Note: Some 1-lb cylinders may form frost when near empty.

1. Make sure the control knob is in the “OFF ” position. (Figure 6)

2. Lubricate the threads of the regulator with petroleum jelly.

3. Remove door and insert LP gas tank. (Figure 1)

4.Rotate LP gas tank clockwise until they

fit snugly together. HAND TIGHTEN ONLY. Be careful not to cross threads when screwing in canister. (Figure 2)

5. Test for leaks. See “Checking for Leaks”

section.

Figure 2

Disconnect LP Gas Tank

1.Turn the control knob to the “OFF ”

 

position. (Figure 2)

Figure 3

2.

Remove door. (Figure 3)

 

3.

Rotate LP gas tank counterclockwise

 

 

until it is loose. (Figure 4)

 

4.

Remove LP gas tank. (Figure 3)

 

5.

Store the LP gas tank in a proper

 

 

location, per LP gas tank instructions.

 

Figure 4