Manuals / Unisys / Computer Equipment / Printer

Unisys UDS 1491 Using a Compatible Driver, Epson LQ, IBM Proprinter, IBM X24e AGM/XL24e AGM

Models: UDS 1491

1 24

Download 24 pages 56.9 Kb

Page 20

Using a Compatible Driver

UDS 1491

Using a Compatible Driver

Note: See your software documentation for information on how to select a printer driver.

The drivers below are listed by decreasing compatibility with your printer. Use one as close to the top of the list as possible.

Epson LQ

•Epson LQ 870/1170

•Epson LQ 80/1000

•Epson LQ 2500

IBM Proprinter

•IBM Proprinter X24e/XL24e

•IBM Proprinter X24/XL24

•IBM Proprinter

IBM X24e AGM/XL24e AGM

Use this emulation only when you’ve selected an IBM Proprinter X24e/XL24e driver and you need to use Epson Letter Quality (LQ) high density graphics.

19

Image 20

Unisys UDS 1491 setup guide Using a Compatible Driver, Epson LQ, IBM Proprinter, IBM X24e AGM/XL24e AGM

Contents

Setup Guide UNISYSUDS 1491 Printer Printed in USAPage 4. CD with online User and Setup Guide 5. Setup Guide Check the contents1. Printer 2. Ribbon cartridge 3. Power Cable 1. Grasp tabs 1 and open access cover 2. Remove printhead shipping retainer2. Remove protective material. Replace the paper separator 3. Remove protective material from the pull-up roller assembly1. Grasp tabs 1 and remove the paper separator Important! Leave the clear plastic ribbon shield 2 on the cartridge 1. With access cover open, grasp printhead 1 and slide to center2. Remove ribbon cartridge from packaging 1. Hold ribbon cartridge as shown with knob 1 up and ribbon shield 2 facing platen 2. Turn knob 2 clockwise to take up ribbon slack Page Parallel 1. Make sure both printer and computer are OFFPage 2. Grasp the paper separator 2. Lift slightly then slide back 3. Pivot forward and rest gently against the roller assembly1. Move the paper lever 1 to “REAR” position 3. Open the tractor covers 2. This action raises the paper separator Pull paper and place first two holes on each side over tractor pins 1. Close right tractor cover 2. Push down on lock lever 2 to lock tractor2. Push down on lock lever 2 to lock tractor 2. Swing over the wire paper feed guide 2 to rest on roller assembly 1. Replace the paper separator. Make sure the marks 1 are alignedPage Setting the Top of Form TOF Position Setting Top of Form with Forms Tear-Off set OFFUsing a Compatible Driver Epson LQIBM Proprinter IBM X24e AGM/XL24e AGMConsult the Users Guide for information on operating your printer menu selections problem solving maintenance and serviceSee the On-Line User’s Guide Service and Support Page 68959691-000 6 8 9 5 9 6 9 1 - 0 0