United States Stove Specifications, Note Your Unit Must Be Installed By A, 6041TP/6041HF

Fireplace Institute)

You’ve purchased one of America’s Finest Multi-fuel Burning Heaters. By heating with fuels such as corn and pellets, you’re helping CONSERVE AMERICA’S ENERGY!

NOTE: YOUR UNIT MUST BE INSTALLED BY A

QUALIFIED INSTALLER, such as an NFI (National

Certified Specialist

We strongly suggest installing smoke detectors in your home if not already installed.

Initial burn off may cause slight smoke and odor the first few hours of operation.

Perform initial burn outside if possible

SPECIFICATIONS

United States Stove Company reserves the right to alter products, specifications and price without notice.

Safety Tested & Listed to ASTM- E 1509, (UM) 84-HUD, by OMNI Test Laboratories, Inc., Portland, Oregon USA

Heat Input (as tested)	45,000 BTU/HR
Heat Output (as tested) 	35,100 BTU/HR
Heating Capacity	1,000-2,000 Sq. Ft 
Fuel Storage Capacity	60 Lbs.
Width	29 in./737mm
Height	6041TP/6041HF	6041I
	31 in./787mm	24 in./610mm
Depth	28 in./711mm

BTU output will vary, depending on the brand, type and quality of fuel and the moisture content. Consult your dealer for best results.

Based on post 1982 home construction, requiring 35 BTU/Hr per Sq. Ft.

Remember, this heater should not be used as the only source of heat in the house. Power outages and neglect of periodic maintenance will result in a total loss of heat.

2 USSC