United States Stove C242 Congratulations, Tools and Materials Needed, Heater Dimensions

CONGRATULATIONS!

You've purchased a heater from North America's oldest manufacturer of wood burning products.

By heating with wood you're helping to CONSERVE ENERGY!

Wood is our only Renewable Energy Resource. Please do your part to preserve our wood supply. Plant at least one tree each year. Future generations will thank you.

Tools and Materials Needed

TOOLS

Pencil

6 Foot Folding Rule or Tape Measure Tin Snips

Drill, Hand or Electric

Drill Bit 1/8" Dia. (For Sheet Metal Screws) Adjustable Wrench

Screw Driver (Blade-Type) Gloves

Safety Glasses

MATERIALS

6" Elbow, Collar and Thimble; As Required (24 gauge min.)

1/2" Sheet Metal Screws (No. 10A x 1/2") 6" Diameter, 24 gauge, black or blued steel

Underwriters Laboratories (UL,ULC) Listed Residential Type HT (2100°F) Chimney or use a Masonry Chimney in goor repair.

Floor Protector Material (R value = 2.0) Minimum of 3'-0" x 4'-6" for US Standard or a Minimum of 2'-3 4" x 4'-11" for Canadian Standard Installation As specified On Page 4

Furnace Cement (Manufacturer Recommends: Rutland Black Code 78 or Equivalent)

6" Barometric Draft Regulator (DR-6)

	HEATER DIMENSIONS
	FIG. 1
	38"
31"
5-1/4"	16"

28"

9-3/8"

FLOOR PROTECTOR

25"

2