25.Do assemble the chimney connector so that moisture that accumulates within the chimney will flow back toward the heater.

26.Do remove the ashes from the heater regularly.

27.Do set the thermostat on “HI” and allow the heater to burn for approximately 15 minutes after fresh coal is added before reducing the thermostat setting.

28.Do store coal in such a manner that wet and dry coal will not mix.

29.Do protect your hands with noncombustible gloves when loading the heater, removing ashes, etc.

30.Do keep the heater doors closed except when refueling the heater or removing ashes.

DON’TS

1.Don’t dry clothing or other articles on or near the heater.

2.Don’t store or place flammable liquids, gases, or other pressurized containers near the heater.

3.Don’t use gasoline, gasoline type lantern fuel, kerosene, charcoal lighter fluid, or similar liquids to start or intensify a fire. Using these and other similar materials can cause an explosion within the heater.

4.Don’t use an unlisted, type B, or poorly constructed or maintained chimney to vent this heater.

5.Don’t use galvanized pipe, steel pipe less than 24 gauge, or pipe of a diameter smaller than 6 inches as a chimney connector.

6.Don’t store ashes in combustible containers, not store them near combustible materials nor dispose of them until they have completely cooled.

7.Don’t use power blowers or air circulation systems with this heater that are not specifically recommended in this manual.

8.Don’t neglect to inspect regularly and maintain door gaskets and latching mechanisms to assure the intended tightness of the fire chamber.

9.Don’t install the heater or chimney connector at clearances less than those specified in this manual.

10.Don’t install this heater where flammable or explosive materials or vapors are likely to be present.

11.Don’t install this heater in a chimney flue that is used by another appliance.

12.Don’t neglect to clean and inspect your chimney regularly.

13.Don’t operate this heater with the doors open.

14.Don’t use the heater with missing or damaged parts.

SAFETY NOTICE

In the unlikely event that your heater “overfires” ( a condition evidenced by elbows, stovepipes, and connectors glowing red in appearance or otherwise discoloring), then your installation is subject to excessive draft created by either a chimney too tall or too great in diameter in conjunction with its height, or some other factor of an indeterminate cause. In this event, you should install a barometric draft regulator. Such installation will preclude any overfiring and/or any hazardous conse- quences of potential overfiring.

Barometric Draft Regulators are generally available where you purchased your stove or may be ordered directly from United States Stove Company at a nominal charge.

2001 Consumer Price:

$24.00 - Includes Shipping and Handling

BAROMETRIC DRAFT REGULATOR

Model DR6

WARRANTY CLAIM INFORMATION AND REPAIR PARTS

A heater warranty is included with this owner’s manual. For warranty claims, follow the instructions provided by the warranty.

ORDER ALL YOUR REPAIR PARTS FROM YOUR DEALER BY SUPPLYING THE FOLLOWING INFORMATION:

1. Part Name 2. Part Number (Not Key No.) 3. Model Number of Heater 4. Quantity of Part(s) needed

SEE FIGURE 12 FOR REPAIR PARTS

16

CAC

Page 15 Page 17
Page 16
Image 16
United States Stove DR6 warranty See for Repair Parts, Barometric Draft Regulator
Page 15 Page 17

DR6 specifications

The United States Stove DR6 is a prominent addition to the world of heating appliances, known for its blend of functionality, efficiency, and design. This wood-burning stove is an ideal choice for those seeking an effective and eco-friendly heating solution for their home.

One of the standout features of the DR6 is its robust construction, featuring a heavy-duty steel body that is built to withstand the rigors of daily use. The stove is designed to provide durability and longevity, ensuring years of reliable performance. The large firebox is capable of accommodating logs up to 18 inches long, providing ample space for a sustained burn, which translates to more heat for extended periods.

The heating efficiency of the DR6 is noteworthy, boasting an impressive 78% efficiency rating. This is achieved through advanced combustion technologies that maximize heat output while minimizing smoke and emissions. The secondary combustion system is particularly beneficial, as it ensures that burning gases are ignited before being released into the atmosphere, leading to cleaner combustion and reduced environmental impact.

Another key characteristic of the DR6 is its user-friendly operation. The stove features a convenient air control system, allowing users to easily adjust the airflow for optimal burn rates. This flexibility ensures that users can tailor the heating experience according to their specific needs, whether they require a quick burst of heat or a slower, more consistent burn.

The aesthetic appeal of the DR6 is also worth noting. With a sleek design and classic cast iron door, it fits seamlessly into various interior styles, from rustic cabins to modern homes. The large viewing window provides a cozy ambiance, allowing users to enjoy the flickering flames while maintaining a comfortable temperature.

Safety features have not been overlooked with the DR6. It includes a built-in safety feature that prevents overheating, and the legs are designed to allow for proper clearance from combustible materials. Additionally, the stove meets the stringent safety and emissions standards set by regulatory bodies, making it a responsible choice for homeowners.

In summary, the United States Stove DR6 combines efficiency, safety, and aesthetic appeal, making it a top contender in the wood-burning stove market. Its robust features, advanced technologies, and attention to design create a dependable heating solution that enhances any living space while being eco-conscious. For those in search of a reliable and stylish heating option, the DR6 is undoubtedly worthy of consideration.
Top Page Image Contents