United States Stove DR6 warranty Oughly Informed

There are basically two methods of metal prefabricated chimney installation. One method is to install the chimney inside the residence through the ceiling and the roof. The other method is to install an exterior chimney that runs up the outside of the residence.

REMEMBER: Follow the chimney manufacturer's installation instructions and maintain the manufacturer's specified clear- ance distance.

Additional chimney informationis presented throughout this manual. READ IT THOROUGHLY TO BE MORE THOR-

OUGHLY INFORMED.

CONNECTION OF CHIMNEY CONNECTOR TO A MASONRY CHIMNEY THROUGH A COMBUSTIBLE WALL

PART A, FIGURE 7

(FIGURE 7 CONTINUED ON NEXT PAGE)

MINIMUM 12 IN.

TO COMBUSTIBLES

CHIMNEY FLUE

MASONRY CHIMNEY CONSTRUCTED TO NFPA 211

MINIMUM CHIMNEY CLEARANCE TO BRICK AND COMBUSTIBLES IS 2 IN.

MINIMUM CLEARANCES 12

IN. OF BRICK ALL AROUND

CHIMNEY CONNECTOR TO HEATER

FIRE CLAY LINER

(5/8" MIN. WALL THICKNESS)

MIN. 3-1/2" THICK BRICK

MASONRY WALL

PART B FIGURE 5 -

(FIGURE 5 CONTINUED)

MINIMUM CHIMNEY CLEARANCES FROM MASONRY TO SHEET STEEL SUPPORTS AND COMBUSTIBLES 2 IN.

		FLUE
FACTORY-BUILT		CHIMNEY
CHIMNEY LENGTH
	NONSOLUBLE
	REFACTORY
	CEMENT
	CHIMNEY LENGTH
	FLUSH WITH INSIDE
AIR SPACE	OF FLUE
9 IN. MINIMUM

MASONRY CHIMNEY CONSTRUCTED

TO NFPA 211

AIR SPACE

MINIMUM CLEARANCE 9 IN. ALL AROUND

CHIMNEY CONNECTOR TO HEATER

USE CHIMNEY MFRS. PARTS TO

ATTACH CONNECTOR SECURELY

SOLID INSULATED, LISTED FACTORY-BUILT CHIMNEY LENGTH

SHEET STEEL SUPPORTS

(24 GAUGE MIN. THICKNESS)

6 CAC