Universal Electronics 4 manual Key Charts, Use Guide to display the program guide

Key Charts

The LED (red light) blinks to show that the remote control is working and is sending signals.

Press AUDIO, VCR, TV, or CBL once to select a home entertainment component to control.

Press POWER once to turn on or off the selected home entertainment component.

Use SETUP for all programming sequences.

Use the keypad (0 ~ 9) to directly select channels (e.g., 09 or 31).

Press MUTE once to turn sound off or on.

Press ENTER once after entering channel numbers on some TV models.

Use VOL+ (or VOL-) to raise (or lower) the sound volume.

Use CH+ (or CH-) to select the next higher (or lower) channel.

Press LAST once to recall the last channel and to page back one screen in the main menu.

Use FAV to cycle through your favorite channels that are stored in your cable converter.

Use GUIDE to display the program guide.

Press PPV/LOCK once to display the pay per view menu or to lock out a specific channel on your cable converter.

Use EXIT to exit out of your cable converter’s menu and guide.

continued on next page...

5