30
RE-ASSIGNING DEVICE KEYS
The Atlas DVR/PVR 5-Device Universal Remote Control
can be set up to control a second device.For example,
to have the unitcontrol a TV,a Cable Converter,and two
DVD Players,you will need to re-assign the unused AUX
key to operate the second DVD Player as follows:
NOTE:AUX is preset at the factor y to control an RCA VCR.
Performing the below steps will overwrite those settings.
1. On the remote control,press AUXonce; it will
blink once.Then press and hold SETUP until
the AUXkey blinks twice, then release SETUP.
2. Enter 9- 9- 2.The AUXkey will blink twice.
3. Press DVD once,then press AUX once. The
AUX key will blink twice.
4. The AUXkey is now ready to be programmed
for your second DVD player.See Programming
Device Controlon page 10.
To re-assign other device keys,repeat steps 1 to 4 and
substitute the key sequence using the following chart:
NOTE:Only one device can be assigned to an unused device key
at a time.
To Re-Assign Perform Key Sequence
AUXas 2nd AUD ke y: AUX- SETUP- 9- 9- 2- AUD- AUX
AUXas 2nd TV ke y: AUX- SETUP- 9- 9- 2- TV- AUX
AUXas 2nd CBL ke y: AUX- SETUP- 9- 9- 2- CBL- AUX
AUXback to AUX:AUX - SETUP- 9- 9- 2- AUX - AUX
To re-assign another unused device key,substitute it for
the AUXkey above and then perform the sequence.For
example,to re-assign an unused AUDkey as a second DVD
key,perfor m AUD- SETUP - 9- 9- 2- DVD - AUD.
When a re-assignment is done,the selected device key
(e.g.,AUD) will blink twice to confirm your choice.At that
time,you will need to program device control (see
Programming Device Controlon page 10).
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 30