31
CHANGING VOLUME LOCK
On this remote control,Global Volume Lockis set to TV,so
you can control TV volume while in the AUX,DVD,TVor
CBLmode. Ifdesired, you can still perform Individual
Volu me Un l oc k on a selected device to set its volume con-
trol for independent operation.
NOTE:The audio mode’s volume controls are active regardless of
Volume Lock settings.However, if you lock the volume controls to
the AUDmode, you will have control of the audio device’s volume
in all other modes (i.e.,AUX,DVD,TV,and CBL).

To Unlock Volume Control For A Single Device

(Individual Volume Unlock):

1. Assuming Global Volume Lockis active,selec t
a mode on the remote control that you want to
unlock (e.g.,CBL) and press it once.Next,
press and hold SETUP until the device key
blinks twice,then release SETUP.
2. Enter 9- 9- 3.The last-selected device key
will blink twice.
3. Press VOL-once. The last-selected device key
will blink four times.
4. Repeat steps 1 through 3 (ofthis section) for
each device you want volume to be unlocked.
5. Now,after you select a device that has volume
unlocked (e.g.,CBL), pressing VOL+,VOL-,or
MUTE,will control the device’s volume only in
its own mode.

To Unlock All Volume Control

(Global Volume Unlock):

NOTE:Performing these instructions will set independent volume
control for all programmed devices.
1. On the remote control,press and hold SETUP
until the last-selected device key blinks twice,
then release SETUP.
2. Enter 9- 9- 3.The last-selected device key
will blink twice.
3. Press VOL+once. The last-selected device key
will blink four times.
continued on next page...
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 31