CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 13
CHANGING VOLUME LOCK (cont’d)
Locking Volume Control To One Mode
(Global Volume Lock)
2.Enter 9 - 9 - 3 and then press any mode key once (e.g., TV). The LED will blink twice.
3.Now, when you press VOL▲, VOL▼, or MUTE, the volume of the selected device (e.g., TV) will be controlled, regardless of the mode you have selected.
Unlocking Volume Control For A Single Device (Individual Volume Unlock)
1.After performing Global Volume Lock (above),press a desired mode key where you want volume to be unlocked (e.g., DVD/VCR) and controlled within its own mode.
2.Press and and hold SET until the LED (red light) blinks twice, then release SET.
3.Enter 9 - 9 - 3 and then press VOL▼once. The LED will
blink four times.
4.If desired, repeat steps 1 through 3 (of this section) for each device that you want volume to be unlocked.
5.After selecting a device that has volume unlocked (e.g., DVD/VCR), pressing VOL▲, VOL▼, or MUTE will control the
device’s volume only in its own mode.
Unlocking All Volume Control (Restoring Default Setting)
NOTE: Performing these instructions will restore independent volume control for all pro- grammed devices (e.g., TV volume control in TV mode, VCR volume in DVD/VCR mode, etc.).
1.On the remote control, press and hold SET until the LED (red light) blinks twice,then release SET.
2.Enter 9 - 9 - 3 and then press VOL▲once. The LED will
blink four times.
3.Volume will again be independently controlled according to its default states for all programmed devices.
13
