Key Charts

When the LED (red light) blinks, the remote control is working and (after programming) is sending signals.

Press DVD/VCR, CBL/SAT, or TV once to select a desired home entertainment device to control. Also see the Device Table on page 6.

Press POWER once to turn on or off the selected device. For master power control, see Programming A Master Power Macro on page 10.

Use the keypad (1 ~ 9 and 0) to directly select channels (e.g., 009 or 031).

Use TV/VID to switch the TV’s input to view TV or video programs.

Press ENTER once after entering the channel numbers on some TVs.

Use GUIDE to display your selected device’s program guide or setup menu.

Press MENU once to display your selected device’s main menu.

Use INFO to display the current channel and program or on-screen directory.

Use EXIT to exit from your selected device’s guide or menu.

Use the Cursor Keys to move the cursor in the pro- gram guide and menu screens.

Use SELECT (OK) to choose options from your selected device’s menu or guide.

Press LAST once to recall the last channel.

Use FAV to scan all channels, or after programming, to scan up to10 favorite channels.

Use CH▲ (or CH▼) to select the next higher (or lower) channel.

Press SUBTITLE/CC once to display (or turn off) sub- titles or closed captions,if available on your DVD player or cable/satellite service.

For a PVR (or DVR), press PVR MENU once to dis- play a list of your recorded shows.

Press MUTE once to turn the sound off or on.

Use VOL▲ (or VOL▼) to raise (or lower) the sound volume.