Universal Electronics URC - 4130 Installing the Batteries, Features and Functions, Device keys

Installing the Batteries

Your TOTAL CONTROL needs two new AA/LR6 alkaline batteries.

1Remove the battery cover from the back of your

TOTAL CONTROL.

2Match the batteries to the (+) and (-) marks inside the battery case, then insert the batteries.

3Press the battery cover back into place.

Features and Functions

Picture of the TOTAL CONTROL on page 3.

1	LED
	The LED (Light Emitting Diode) flashes red to show the
	remote is working.
2	Device keys
	The TV, VCR and DVD keys select the device to be
	controlled. For example pressing the TV key allows the
	remote to control the functions of your Television, after
	pressing the VCR key you can operate your Video
	Recorder etc.
3	Power key
	The Power key controls the same function as on your

original remote.

4

5

SET key

The SET key is used to set up your TOTAL CONTROL and to access special functions.

Number keys

The number keys (0-9, 10, 20 (AV)) provide functions just like your original remote. If your original remote uses one/two digit input switching (-/-- symbol), this function can be obtained by pressing the -/-- key. If your original remote has a 20 key, this function can be found under the AV key.

6 AV key

The AV key operates the same function as it did on your original remote control.

7 Menu Key

The Menu key controls the same function as it did on your original remote control.

4