NOTE: Steps 4 through 6 need to be completed within 10 seconds. Please read the next three steps before proceed- ing.
4.Press and release the L key in which the new fea- ture is to be learned. The Cinema 7+™’ s red light will flash rapidly.
5.Align your original remote control with the arrow mark to the left of the LED on your Cinema 7+™ remote control (see diagram below)
2"
6.On your original remote, press and hold the key (fea- ture) you want to learn until the red light on the Cinema 7+™ blinks twice. (If the red light does not blink twice, stop and repeat steps 1 through 6.)
NOTE: You can now repeat steps 3 through 6 to learn func- tions on the other L keys.
7.
Press and hold in the SETUP key until the Cinema 7+™ ’s red light flashes twice to lock in your new fea- ture. (If the red light does not blink twice, stop and repeat steps 1 through 6).
8. 
To test the new feature, press and release the 
Device key in which the feature was learned followed by the L key on which the feature was learned.
Deleting Functions from the L Keys:
1.Press and hold in the SETUP key until the Cinema 
7+™ ’s red light flashes twice and then release the
SETUP key.
2.Enter in 9 - 7 - 6.
3.Press and release the Device key (e.g., TV) where the learned feature to be deleted is stored.
4.Press the L key to be deleted twice. The Cinema
7+™ ’s red light will blink twice after the second press of the L key.
SETTING UP OTHER COMPONENTS
In addition to the components labeled on the device keys (TV, VCR, DVD/LD, CBL/SAT, etc.), the Cinema 7+™ can also operate the following components: Cassette Decks, Infrared Home Automation, MiniDisc, Video Accessories and Miscellaneous Audio Components (Graphic Equalizers and Digital Music Service Boxes).
The Setup Codes for these components can be accessed under the follow- ing device keys:
Cassette Decks: | Use the VCR Key | |
IR Home Automation: | Use the CD Key | |
MiniDisc: | Use the CD Key | |
Video Accessories: Use the CBL/SAT Key
(Note : WebTV found under Video Accessories)
Web Site : http://www.oneforall.com
Miscellaneous Audio: Use the AUX or RCVR Key
For example, to set up a Cassette Player on the VCR key:
1.Turn on your Cassette Player and insert a tape.
2.
Press VCR and release. Press and hold SETUP until
the Cinema 7+™ ’s red light blinks twice, then release SETUP.
3.Enter the first
4. 
Aim the Cinema 7+™ at your Cassette Player and press PL (Play). Your unit should play the tape. If it does not respond, repeat steps
5.Your Cinema 7+™ is now programmed to operate your Cassette Player.
Remember, if you want to use your Cinema 7+™ to operate your Cassette Player, press the VCR key first.
Setup Codes For Audio Cassettes
Aiwa | 0029, 0197 |
Bang & Olufsen | 0219 |
Carver | 0029 |
Denon | 0076 |
Harman/Kardon | 0182 |
JVC | 0244 |
Magnavox | 0029 |
Marantz | 0029 |
Optimus | 0027, 0220 |
Philips | 0029 |
Pioneer | 0027, 0220 |
Sansui | 0029 |
Sony | 0170, 0243, 0291 |
Victor | 0273 |
Wards | 0027 |
Yamaha | 0097 |
Setup Codes For IR Home Automation
GE | 0240 |
Lutron | 0318, 0597 |
One For All | 0167 |
RadioShack | 0240 |
Security System | 0167 |
Universal X10 | 0167 |
X10 | 0167 |
Setup Codes For MiniDisc
Denon | 0873 |
JVC | 0826, 0681 |
Onkyo | 0868 |
Sharp | 0861 |
Sony | 0490 |
Setup Codes For Video Accessories
Archer | 0160 |
GC Electronics | 0160 |
Jebsee | 0160 |
Magnavox | |
Philips Web TV | 0818 |
RadioShack | 0160 |
TeleCaption | 0171 |
Sony | 0850 |
Setup Codes For Miscellaneous Audio
Web Site : http://www.oneforall.com
24 | 25 |
