Universal Remote Control MX-500TM

K. System Settings

All programming is done by first entering the SETUP

mode in the remote control. Press both the MAIN and

ENTER buttons simultaneously for three seconds to enter

the SETUP mode. SETUP will be shown at the top of the

LCD screen.

You exit the SETUP mode by simply pressing the MAIN

button.

Important: When using the Preprogramming method

starting on page 13, always use the appropriate button as

shown in the illustration above when asked “FROM

TABLE”. You may have already changed the labels of the

buttons, but the code tables are in the positions as shown.

For example, the AUDIO Code Table (refer to pages

starting at 58) will ALWAYS be the top-left button. The

SAT Code Table will always be the 4th button down on the

right side of the LCD screen, etc.

3. Summary of Operations

DIS

PREVPREV

DIS