Universal Remote Control MX-500TM

7. Press the MAIN button to exit to main Erase mode.

8. Press the MAIN button once again to exit the SETUP

mode.

C. Erasing Macro Functions

1. Erase M1, M2, M3, POWER and SYSTEM OFF

Buttons

1. Go to the SETUP mode by pressing both the MAIN and

ENTER buttons simultaneously for three seconds.

2. Press the ERASE button next to the LCD screen.

3. Press the MACRO button.

4. If you wish to erase all of the macro buttons in the

MX-500TM, press the ALL button and then press the SURE?

button at the next LCD screen.

5. If you wish to erase just one of the macros, press the

KEY button at step 4 and then one of the M1, M2, M3,

POWER or SYSTEM OFF buttons to erase the macro

functions from that button.

6. Repeat from Step #5 to erase any other macro buttons

you require.

7. Press the MAIN button to exit to main Erase mode. Press

the MAIN button once again to exit the SETUP mode.

8. Erasing Existing Programming