NOTES:
If your audio/video component does not respond, try the other codes for your brand. If it still doesn’t respond, try the Code Search using the followingmethod.
If the LED blinked rapidly when you entered the code, you may have entered an invalid code. Recheck the code in the code list (separate sheet) and try again.
SEARCHING FOR CODES
1. Turn on the device you want to control.
2.Press and hold SETUP until the LED indicator lights steadily. Release Setup button.
3.Press the mode button that matches the equipment you want to control. The LED blinks once.
4.Press CHANNEL + repeatedly* until the
device to be controlled changes channel.
If you accidentally go past the code, press CHANNEL
5.Press and release the ENTER button to complete the setup.
*NOTE: You might have to press CHANNEL+ many times (50+). If the device does not have a Channel Up function, use the PLAY button (VCR only) or the POWER button.
10
