Universal Remote Control UR3L-SR4 manual Programming the All Off Button

G.Erasing All Learned Commands from One Component

STEP1 Press the [COMPONENT] and [INPUT] buttons simul- taneously for 3 seconds until the Component LED light turns on.

STEP2 Press and hold both the [COMPONENT] button you want to erase and the [PAUSE] button for 5 seconds. The Component LED will blink twice to confirm the erasure.

STEP3 To exit, press and hold both the [COMPONENT] and [INPUT] buttons simultaneously until the Component LED blinks 3 times.

H. Programming the All Off Button

This allows you to program the All Off button so it can send up to three power On/Off commands with one button press.

STEP1 Press the [CBL] button.

STEP2 Press the [All OFF] button and the [OK/SEL] button simultaneously for 3 seconds. The [CBL] button will turn on for 30 seconds.

STEP3 Press the first [COMPONENT] button you want to store in the [ALL OFF] button and then the [POWER] button. Repeat this for other Components until you have stored all the desired power commands into the [ALL OFF] button.

STEP4 Press the [CH+] button to save the power commands you stored. The [CBL] button will blink twice to con- firm the commands have been saved.

I. Programming for Advanced Functions.

If your remote model has custom-programmable Macro but- tons available, they can be programmed to act as a ‘Macro’ or Favorite Channel button in CABLE mode. This allows you to pro- gram up to five 2-digit channels, four 3-digit channels or three 4- digit channels that can be accessed With one button press.

6