Manuals / Universal Security Instruments / Household Appliance / Smoke Alarm

Universal Security Instruments SS-775-LR Avoid These Locations, False Alarms see Silence Control

Models: SS-775-LR SS-776-LR

1 6
Download 6 pages 46.47 Kb
Page 3
Image 3

AVOID THESE LOCATIONS

•the garage – products of combustion are present when you start your automobile.

•near appliances or areas where normal combustion regularly occurs (kitchens, near furnaces, gas hot water heaters). Use smoke alarms with Silence Control for these areas.

•in areas with high humidity, like bathrooms or areas near dishwashers or washing machines. Install at least 3 feet (0.9 meters) away from these areas.

•in areas of turbulent air such as air returns or heating and cooling supply vents, smoke alarms shall not be located where airflow prevents operation of the alarms.

•in extremely dusty, dirty or insect-infested areas. Loose particles interfere with smoke alarm operation.

•in areas where temperature may fall below 400F (4.40C) or rise above 1000F (37.80C).

•closer than 1 foot (0.3m) from fluorescent lights, electrical "noise" and flickering may affect the alarm's operation.

•closer than 3 feet (0.9m) horizontal path from the tip of the blade of a ceiling suspended (paddle) fan.

•on a poorly insulated ceiling or exterior wall (mount smoke alarm on an inside wall).

THIS SMOKE ALARM WILL NOT OPERATE WITHOUT A BATTERY INSTALLED. PROPER BATTERY MUST BE INSTALLED IMMEDIATELY WHEN LOW BATTERY SIGNAL IS GIVEN OR THE UNIT WILL FAIL. TEST WEEKLY. READ AND FOLLOW ALL INSTRUCTIONS OR UNIT WILL NOT OPERATE PROPERLY.

FALSE ALARMS (SEE "SILENCE" CONTROL)

The smoke alarm is designed to minimize false alarms. Smoking will not normally set off the alarm unless smoke is blown directly into the smoke alarm. Combustion particles from cooking may set off the alarm if the smoke alarm is located close to the kitchen cooking surface. Large quantities of combustion particles are generated from spills or broiling.

If the smoke alarm does alarm, check for fires first. If a fire is discovered, get out and call the fire department. If no fire is present, check to see if one of the reasons listed above may have caused the alarm. Use the "silence" feature if it is a false alarm.

TAMPER LOCKING PIN

To make your smoke alarm somewhat tamper resistant, a locking pin has been provided. Using this pin will deter children and others from removing the alarm from the mounting ring. To use the pin, insert it into the hole in the side of the alarm after it has been installed on the mounting ring. Note that the tamper pin will have to be removed in order to change the battery, which can be done easily with a pair of long nose pliers. Using the long nose pliers, pull the pin out of the hole. It is now possible to remove the smoke alarm from the mounting ring.

INSTALLATION

Your smoke alarm is designed for easy mounting on wall or ceiling. A complete mounting kit is included with the smoke alarm. First, attach the mounting ring on the wall or ceiling with the screws provided. Second, push and turn the smoke alarm clockwise onto the mounting ring. (Note: Your smoke alarm is equipped with a safety device which prevents mounting unless a battery is installed. If your smoke alarm will not lock into the mounting ring, check to make sure a battery is installed.)

Early warning fire detection is best achieved by the installation of fire detection equipment in all rooms and areas of the household as follows: A smoke alarm installed in each separate sleeping area (in the vicinity of, but outside of, the bedrooms) and heat or smoke alarms in living rooms, dining rooms, kitchens, hallways, attics, furnace rooms, closets, utility storage rooms, basements and attached garages. Test the smoke alarm weekly to assure proper operation.

Page 3

Page 2 Page 4
Page 3
Image 3
Universal Security Instruments SS-775-LR manual Avoid These Locations, False Alarms see Silence Control, Tamper Locking PIN
Page 2 Page 4

SS-775-LR, SS-776-LR specifications

Universal Security Instruments has made a significant mark in the home safety industry with their innovative and reliable smoke and carbon monoxide detectors. Specifically, the Universal Security Instruments SS-776-LR and SS-775-LR models stand out for their advanced features and user-friendly designs.

The SS-776-LR is a combination smoke and carbon monoxide detector that provides dual protection for your home. Its primary features include photoelectric smoke sensing technology, which is particularly effective in detecting slow smoldering fires, and an electrochemical carbon monoxide sensor for accurate CO detection. The unit’s dual ionization chamber design enhances smoke sensitivity, reducing the chances of false alarms while promoting quicker reaction times in case of real danger. Furthermore, the SS-776-LR is equipped with voice alerts that provide clear, intelligible warnings about the specific type of hazard present, whether it be smoke or carbon monoxide.

On the other hand, the SS-775-LR is a dedicated smoke detector that also utilizes photoelectric technology for effective smoke detection. It offers an advanced design, ensuring minimal nuisance alarms while maintaining high sensitivity to actual fire threats. The SS-775-LR features a sleek and modern appearance that allows it to blend seamlessly into any décor. One of its standout characteristics is the Smart Hush feature, which allows users to temporarily silence non-threatening alarms for up to 10 minutes, a valuable function during cooking or similar activities that may trigger false alarms.

Both models boast a long-lasting battery life, ensuring dependable performance over time without the hassle of frequent battery replacement. They also feature visual indicators that alert users when the battery is running low, promoting proactive maintenance. Another essential characteristic shared by these detectors is their easy-to-install design, making them suitable for both renters and homeowners alike.

In addition to their impressive functional specifications, both SS-776-LR and SS-775-LR adhere to the highest safety standards and are rigorously tested for performance and reliability. Their compact sizes allow for flexibility in placement, ensuring that safety can be achieved in various locations throughout your home.

In summary, the Universal Security Instruments SS-776-LR and SS-775-LR provide comprehensive safety solutions, combining cutting-edge technology with practicality. With their user-friendly features, elegant design, and efficient detection capabilities, they represent a wise investment for anyone looking to enhance their home’s security against fire and carbon monoxide hazards.