![](/images/new-backgrounds/1308950/30895019x1.webp)
Installing the Phone
Installing the Handset Battery
NOTE: You must connect the handset battery before using the cordless handset(s).
CAUTION: To reduce the risk of fire or personal injury,
use only the Thomson Inc. approved model GP80AAAHC - NiMH 1.2V 800mAh rechargeable
1.Locate batteries and battery door which are packaged together inside a plastic bag and are separate from the handset.
2.Locate the battery compartment on the back of the handset.
3.Insert the batteries.
4. Close the battery compartment by pushing the door up until it snaps into place.
Base Station
1.Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and place your cordless telephone on a level surface near your personal computer.
System Requirements:
Recommended:
PC running Windows 2000 or XP 1 GHz processor
256 MB RAM
30 MB free space on your hard drive Cable, DSL or equivalent broadband
connection to Internet Standard landline
Minimum:
PC running Windows 2000 or XP 400 MHz processor
128 MB RAM
10M free disk space on your hard drive Internet Connection (either
or any broadband: cable, DSL, etc.)
10